Weihrauch HW44
Custom grip target stock
£110 UK only
Ambidextrous rifle stock to fit the Weihrauch HW44 to transform it into a proper carbine.
The length of pull and butt pad height can be set to suit your reach with the thumbwheel
There is also a thumbwheel to set the cheekpiece height for scope to eye alignment.
Trigger to butt pad (LoP) can be from 360mm to 390mm Stock weight is 560 grams.
Bipod not included, This is a 3D printed stock with carbon fibre bracing
Be sure the click on the "Fitting instructions" button above
.jpg)
.jpg)
.jpg)
.jpg)
£30 UK only
HW44 Match style grip
This is a match-style target grip designed for the Weihrauch HW44 air pistol.
It features a height-adjustable palm rest that securely locks your hand in place,
enhancing comfort and stability while shooting.
The grip is available in both left and right-hand versions to suit individual preferences.
Installation requires the removal of the 3mm pin at the back of the standard grip
and the M3 countersunk screw located in front of the trigger guard.
The 3mm pin can be tapped out from either side using a suitable drift
or one of the supplied M3 bolts.
Be sure the click on the "Fitting instructions" button above
Single shot loader in .177 or .22
£20 UK only
Swing out single shot loader for the Weihrauch HW44 Much easier to use than the factory supplied tray Simply slides in the same as a magazine
PLEASE NOTE
This loader will NOT fit the HW110, I have a different loader for the HW110.
Smooth flip out action, snaps shut with 2 small magnets. Internal O ring holds the pellet in place as the loader is closed. Laser engraved calibre markings
If you wish to see a video of the loader in action, please checkout below
.jpg)
.jpg)
.jpg)